Laboratory Doctor Blade Tape Caster

CAM-L series

Horizontal Drying Zone Tape Caster

The CAM-L laboratory tape casters are designed for small scale experiments and production. The carrier film is unwound from a roll with adjustable torque control, which determines the carrier tape tension. The carrier foil is guided through the casting head where the slurry is deposited via the doctor blade method. The casting gap is easily adjusted using micrometer screws. The doctor blade gap measurement is done with two measuring gauges (readout in micrometers or mils). A high precision tungsten carbide doctor blade and the granite bottom plate ensure a stable casting process. The casting speed is fully adjustable.

  • PET film based tape casters suitable for laboratory and low production volume
  • Wide configurations range
  • Automatic gravity slurry feeding
  • Casting speed control
  • Tape winding for continuous operation

Technical Specification

Casting speed: 0,2 – 2 m/min (0.7 – 6.6 ft./min) or custom
Carrier tape width: 250 mm max. (10 inch)
Casting width: up to 200 mm max. (8 inch)
Blade gap setting: Max. 5 mm (196 mils)
Drying section length: 2 to 4 m (6.6 to 13.2 ft.), available in 1 m (3.3 ft.) increments
Carrier film thickness: 20 to 120 microns
Power requirements: depends on configuration and custom request
Dimensions: depends on configuration, for 4m (13.2 ft.) long dryer approx. 5m (16.4 ft.) total length
width: 0,7m (28 inches)
height: 1,2 to 1,5m (47 to 60 inches) depending on configuration

How to order

Cam L 25 X X X
| | | | | |
| | | | | B - Bottom heating
| | | | T - Top heating
| | | Dryer length: 2, 3 or 4 meter
| | PET width (25 only - max PET film width in cm: *option: special custom request)
| Laboratory type
Casting machine