Suitable for labs to medium production volumes
- Simplified manual stacker
- Uniaxial lamination posibility
- Pre-registration by registration pins
- High pressing force up to 42 tons
The SM-series of stackers were designed for labs to medium production volumes. On these
machines the green ceramic tapes without or with carrier film can be processed. If carrier
film supported tapes are used, than tape can be first pressed on to previous one and after
that carrier film has to be removed manually by hand. Stack is built on a single carrier block.
The stacking sequence such as pressing force and pressing time are fully programmable via
a touch screen interface.
Technical Specification
Number of carrier block processed: |
1 |
Stacking force: |
up to 420 kN (94419 lbf) |
Stacking temperature: |
up to 80 °C (176 °F) |
Typical cycle time: |
15 sec. (depends of stacking time) |
Control: |
PLC + HMI |
App. dimensions: |
L x W x H: 1,1 m ( 43 inch) x 1,3 m ( 51 inch) x 1,2 m ( 47 inch) |
Electricity: |
3x380 or 3x220 V, 50/60 Hz, 3x10 A, app. 3.5 kW according to the customer requirements |
Compressed air: |
0,6 MPa (90 PSI), up to 200 L/min (7 CFM) |
Vacuum avaliable: |
-0,09 MPa/ -13 PSI (0,02 MPa/ 2.9 PSI absolute), 200 L/min / 7 CFM. |
Available options
- rotation station
- vacuum pump
- programmable
- recipes - servo controlled hydraulic system
How to order
SM |
- |
X |
X |
X |
|
| |
|
| |
| |
| |
|
| |
|
| |
| |
Pressing force: L - up to 200 kN, H - high up to 420 kN |
| |
|
| |
- - No registration, P - Pin registration |
| |
|
Sheet size: 4, 6 or 8 inch |
Stacker SM type |