 |
Download Keko Equipment Brochure |
 |
CUSTOM FRONT-END EQUIPMENT for the MANUFACTURING of all CERAMIC MULTI-LAYERS and FUEL CELLS |
The Full Line of Keko Equipment
Keko Equipment has been manufacturing custom-designed front-end equipment for the production of all multilayer ceramic passive components and devices since 1977. The product line includes tape casters, punching machines, automatic integrated printers and stackers, stand alone screen printers, roll to roll screen printers, isostatic presses, automatic chip cutters, and chip taping machines.
The CAM-M1 tape caster is now the most successful tape caster in the market for casting on polyester foil on 15-35 cm (6 to 14 inches) width, due to its accuracy, automation and in-line thickness gauge. With the PAM 4/8 punch and the IS-3A line of stacking equipment Keko now provides the best low cost entry into automatic LTCC manufacturing for high accuracy applications.
Special product lines are available for fuel cell manufacturing and piezo ceramic high stacks.
Haiku Tech is the exclusive distributor of Keko Equipment in the Americas, Europe, India and Israel.
Keko Equipment Products Listing
TAPE CASTING MACHINES
- CAM-M1 Carrier Film Tape Casting Machine
- For high accuracy (ceramic) tape casting on carrier films
- Compact designs for thin casting down to 2 microns
- Machines with extended drying modules for solvents and thick tapes up to 1 mm
- CAM-22 Semi-Automatic Steel Belt Tape Caster
- Accuracy, stability and higher casting speeds
- CAM-C Custom Built Tape Casters
- up to 1 m (3ft) wide and 22 m (70 ft) long tailor made for your application
SCREEN PRINTERS
- P-200/400 Screen Printers
- Flexible high precision screen printers for screens up to 800 by 800 mm
- With or without vision and automation
- Can be fitted into existing or new lines with product buffers, on- and off-loading or dryers
PRINTER/STACKERS
- PAL-9 Fully Automatic MLC Printer Stacker
- High layer counts, large production volumes
- RTP-1 Roll to Roll Screen Printer
- Highest productivity; optional two color printing
- FSP-10 Fully Automatic Multilayer Inductor Maker
- Positions, Stacks, Fills tape vias and prints circuit on punched ceramic tape
- Highest accuracy in printing stacking for the smallest inductors
- FEP-10 Fully Automatic Wet Multilayer Component Maker
- Low-cost bulk production using in-situ paste based ceramic printing
- With up to 4 screen printers
STACKERS
- CSM-2 / CSM-3 Fully Automatic Cover Sheet Maker
- Save precious time in your stacking process by stacking covers off-line
- IS/LS/SM series multilayer ceramic and LTCC stackers
- Highly accurate stacking machine for 4 up to 8 inch sheet sizes
- Use pin or vision alignment technology for 5 micron accuracy
- Uses tape from multiple bins or trays
- Semi or Fully Automatic
- HLS-1 Multilayer Ceramic Cavity Stacker
- for high stacks < 100mm
- vision positioning of sheets or mini-stacks
- integrated pressing and de-airing possible
ISOSTATIC LAMINATOR
- ILS-4/6/8/10 Isostatic Lamination System
- Low-cost highly efficient isostatic warm press for 4”, 6”, 8” or 10”
OTHER EQUIPMENT
- SD-1 Sheet or substrate tunnel drier
- SC-1 Automatic Sheet Cutter
- (with option for fixed alignment hole punching)
- CM-15 Fully Automatic Green Ceramic Cutter
- Fully vision controlled; high speed
- Automated loading/unloading
- CTM-12 Chip Taping Machine
- Flexible, efficient taping machine
- Lab-Equipment Sets
- (designed for low cost laboratory set-up)
- LTCC
- Piezo
- Fuel Cell