Punching Machine

PAM S-series

For development and Production of LTCC/HTCC

Punching Machine PAM S-series

The PAM S-series of punching machines are mainly designed for LTCC applications, where it is required to be able to punch all of patterns. The PAM S-series uses single pin punching tools via holes or regesitration holes in green ceramic tapes, either on carrier film or free-standing. Every hole size is punched using a different tool. Depending on the machine version, either up to 4 or up to 8 different punching tool dimensions can be installed on the machine. Special multiple pins (gang) puching tools are available in order to punch grid type pattern to increase productivity. Numerous version are available, starting with the basic unit, where the operator places single sheet on a alignment table, the machine picks the sheet with a vacuum tool and punches it according to the program, up to the fully automatic version, where individual sheets are cut from a roll, punched and transfered to a magazine. Machine comes (standard) with pin breakage control and sheet vision alignment for sheet alignment against pre-punched registration holes.

Available single pin punching tools
  1. pneumatically driven, diameters 0.1 to 1.0 mm
  2. pneumatically driven, square 0.2 x 0.2 to 1 x 1 mm
  3. pneumatically driven, diameters 1.1 to 5 mm
Available grid punching tools
  1. grid type tools available up to 24 round pins
  2. max. punch diameter not bigger than 0.5 mm depends on pattern

Technical Specification

Punching speed: 20-25 /s at 1 mm distance for selected tools with servo drive, pneumatical typically 13-20 /s.
Punching area: up to 225 mm x 225 mm or 9 by 9 inch; easily changeable by exchange of vacuum pincer.
Tape thickness: up to 500 microns (20 mils) (to be confirmed)
Mylar thickness: 30 to 75 microns (1.2 to 3 mils)
X,Y drive: High precision ball screw and AC servo motors
Positioning accuracy: ±5 microns (0.2 mils)
Programming: manual on the machine or CAD file input (NcDrill or DXF)
Work (sheet) fixing: by vacuum, optional meetal frames fixing
Carrier film thickness: 20 to 75 microns (0.8 to 3 mils)
Punching pin exchange: less than 2 minutes, no special alignment required
Control: PC
Pin breakage test: by camera and vision control (every hole, last hole)
Sheet alignment or re-punching: by camera and punching coordinate calculation
Tape handling: manual by operator
automatic from magazine to magazine
automatic from roll to magazine
Safety: CE compliant
Dimensions: depends on version app. L=2,5 m (99"), D=1,5 m (60"), H=2,5 m (99")
Electricity: app. 2 KW (connection custom)
Compressed air: 0,6 MPa, 200 L/min (90 PSI, 7 CFM)
Vacuum: external vacuum source required

Available options

  • Vacuum pump can be supplied

How to order

PAM - X X X
| | | |
| | | Tape handling, manual (M), magazine to magazine (CC), reel feeder to magazine (RC)
| | Single pin punching tools type (S) or Multi pin punching tools type (M)
| Number of tools positions for Single pin punching tool type (1, 2 or 4)
Tools have to be specified separately.
Punching machine